FFT Analyzer Software Download - Free FFT Spectrum Analyzer - FRF Analysis
Visual Analyzer Software
If you are looking for a FFT analysis software that will allow you to turn your PC into a full-featured measurement instrumentation, Visual Analyzer is the right tool for you!
The best part is that there is no need to install any additional or new hardware.
You can simply use the sound card in your PC to start measuring sound.
With the Visual Analyzer, it is now even easier to analyze sound signals.
Besides, you don’t have to worry about licensing, since the program is already available for everyone.
Visual Analyzer is a highly recommended tool that offers a comprehensive range of sound analysis functions and is suitable for everyone, from audiophiles to engineers.
Use Visual Analyzer today to get a comprehensive picture of your analysis.
Oscilloscope (dual channel, xy, time division, trigger)
Spectrum Analyzer with amplitude and phase display (linear, log, lines, bar, octaves band analysis 1/3, 1/6, 1/9, 1/12, 1/24)
Wave-form generator with “custom functions”, triangular, square, sinusoidal (all with NO ALIASING and smooth transition), white / pink noise, pulse generation, DC generation [New!]
Frequency meter (in time and frequency domain) and counter; in time domain by means of a real time zero crossing algorithm
Volt meter with DC [New!], True RMS, peak to peak and mean display plus resolution calculation
Filtering (low pass, hi pass, band pass, band reject, notch, “diode”, DC removal)
Memo windows (data log) for analysis and storage of time series, spectrum and phase with “triggering” events; THD and Impedance data logging with spline interpolation; possibility to save the graphics in various format (.tee, .txt, .wmf)
Screenshot of Spectrum and Scope window
A TRUE software digital analog conversion (for complete signal reconstruction using Nyquist theorem)
Frequency compensation: possibility to create / edit a custom frequency response and add it to the spectrum analyzer computed spectrum; added standard weighting curves A, B, C [New!] in parallel with custom frequency response function FRF
Support for 8/16/24 bit soundcard by means of API calls
Internal 80 bit IEEE floating point variables for minimum rounding error
Cepstrum analysis , cross correlation
Extended THD measurements, with automatic sweep, compensation, data log
ZRLC meter with vector scope, automatic sweep in time and frequency for automatic measurement
Calibration mechanism (you can calibrate the VA scales directly in VOLT or dB or percent full scale)
Set of values computed in real time (peak to peak, peak, crest factor, form factor, true rms, mean, frequency with zero-crossing algorithm)
Wave file recording and playback
Custom FIR filters
Professional Vibration Analysis Software
NVH Analyzer Lite supported Hardware
- PC Audio Card - USB Audio Interface
- iSV1611 USB Measurement Microphone
- Plug.n.DAQ Lite
- RogaDAQ2
- RogaDAQ4
NVH Analyzer Lite Specifications:
- FFT block size 101 to 51201
- FFT line resolution 0.366 Hz @ 48 kHz / 51201
- FFT Averaging Linear, Peak Hold
- Sum level Band limit – adjustable
- Weighting Slow, Fast, Impulse
- Weighting filters Lin, A, C
- High-pass- Low-pass filter adjustable
- Sensor Calibration menu for microphones and accelerometer
- FFT Spectrum
- Time domain Level vibration acceleration
- Time domain Level vibration velocity
- Time domain Level vibration displacement
- Time domain RMS
- Time domain Mean-Value
- Time domain Peak-Peak
- FFT T-AVG
- Time domain Sound Level
- Time domain Sound Level A-Filter
- 1/3 Octave-Spectrum
- 1/3 Octave T-AVG
- Trigger recording setup menu for unattended acquisition of multiple files
- Up to 10 minutes raw data recording, output in WAV format possible.
- Listening to the measurement data via the PC speaker after recording possible.
Professional NVH Analyzer