The LX-1000 series consists of highly reliable, portable data recorders designed to capture and record measurement data for testing and monitoring tasks across a wide range of industrial and scientific fields.
Thanks to its modular design, the LX-1000 can be precisely tailored to the specific requirements of any given application.
Up to four input modules—each featuring four channels (two of which support CAN)—can be configured; additionally, an expansion unit is available that connects to the main unit and accommodates up to four further input modules.
This allows a single compact device to provide up to 64 recording channels.
By synchronizing four such units, a comprehensive system with up to 256 channels can be created.
Its compact design and fanless operation allow the LX-1000 to be placed in close proximity to the measurement source, enabling interference-free recording of noise, vibration, and other measurement data.
Up to 256 recording channels
- 64-channel recording with one unit, 256 channels by synchronizing four units.
Modular concept
- Input channels can be customised in groups of four (IEPE, analog, Strain, CAN can be recorded directly); dedicated
Fanless design
- The absence of a cooling fan reduces maintenance costs. In the configuration up to 32 channels, a natural air cooling system (fanless) is adopted, which can be used without mounting a cooling fan. *A cooling fan is necessary if even one AR-LXST1000 is installed.
Wide dynamic range
- A dynamic range of 120 dB ensures precise recording with a high signal-to-noise ratio.
Specifications | LX-1000 Series |
|---|---|
Number of input channels | Basic configuration: 4ch (up to 16ch) Extended maximum: 64ch |
Input amplifier / module | IEPE(DC/AC) / Strain(DC) / CAN（module） |
Input range | IEPE：0.1 / 0.2 / 0.5 / 1 / 2 / 5 / 10 / 50V |
Pulse input (standard equipment) | Measurement modes: (1) Count (gate) mode (2) Count (total) mode (3) Period mode (4) Frequency mode (5) rpm mode |
GPS input (standard equipment) | GPS receiver (Option) |
CAN module | 2 ports / module Baud rate:125kbps, 200kbps, 250kbps, 500kbps, 800kbps, 1000kbps, 1250kbps, 1600kbps, 2000kbps, 2500kbps, 4000kbps, 5000kbps Recording mode:All frames recording /ID filtering / Data signal values Compatibleprotocol:ISO-11898-1 2.0A (11-bit ID)/ 2.0B (29-bit ID) ISO 11898-1:2015 (CAN FD) Bus modes of operation:Normal / Listen Only |
TEDS | Yes |
Synchronized operation | Up to 4 units(MAX256ch) |
IEPE sensor power supply | 24V 4mA |
Max sampling frequencies | 102.4kHz |
Sampling frequencies | 96k / 100k / 65.536k / 102.4k Hz Low speed sampling1Hz |
Maximum recording rate | 3.2MByte/s 40kHz bandwidth (102.4kHz sampling) x 16-bit x 16ch |
A/D Converter | 16 / 24bits |
Dynamic range | 120dB（FFT-based) |
Recording media | SDHC / SDXC / PC |
Maximum recording capacity | SDXC:128GByte |
Data Acquisition File Format | TAFFmat (TEAC Data Acquisition File Format) |
Voice memo input | 8kHz/8bit/Mono |
Voice memo output | Yes |
Speaker | Yes |
Digital Control | Yes |
External Trigger | Yes |
Real Time Monitor | Yes |
Interface for PC | LAN(1000BASE-T) |
Cooling | No external cooling required – Fanless: up to 32 ch |
Power supply | AC:100V – 240V (from included AC adaptor) DC:8 – 36V |
Power consumption | 16ch model (AR-LXPA1000 x 4) Approximately 30W 32ch model (AR-LXPA1000 x 8) Approximately 47W |
Battery | Li-Ion IDX NP-L7S 14.8V 4.6Ah |
Battery continuous use time | 7 hours |
Operating temperature and humidity range | 0 – 40℃ / 10-80% (no condensation) |
External dimensions | 300W x 65H x 200D（mm）16ch 300W x 109H x 200D（mm）32ch Expansion unit 300W x 44H x 200D（mm） |
Weight | 3.1kg (16ch/PA) 5.4kg (32ch/PA) 2.3Kg (Expansion Unit） |