Measurement microphones MI15, MI17, MI19, RG-50, and MI21 are 1/4″ types of free-field microphones with integrated electronics that are commonly used in scientific research.
To ensure accuracy, these microphones can be supplied with close tolerances of ±0.5dB and have transfer factors ranging from 10 mV/Pa to 100 mV/Pa.
Constant current power IEPE is the standard power source, usually set at 4mA.
Coaxial cables are used as feed lines, and the standard microphone configuration includes BNC connectors that have optional TNC variations available.
Measurement Microphone IEPE Type
Special Offer
-
Price: 180 €
Shipping price 28 €
MI19 IEPE Type
Free-field | Class 1 acc. to IEC 61672 |
|---|---|
Transducer type | Electrete pressure transducer |
Diameter | 1/4″ |
Polar pattern | Omni |
Frequency range | 20 Hz – 20 kHz |
Sensitivity @ 1 kHz | 50 mV/Pa ± 0.5 dB |
Max. SPL for 1% THD at 1 kHz | 130 dB Peak |
Inherent noise | 30 dB(A) |
Output impedance | <50 Ohm |
Current consumption | 2-6 mA |
Power supply | 18 V DC to 30 V DC |
Bias: | 12.5 Volt |
Temperature range, operation | -20°C to +80°C |
Heat resistant | up to 110 °C |
Diameter | 7 mm ± 0.05 mm |
Length | 83 mm 1/4″ sleeve diameter over the entire length |
Weight | 19 g |
Connector | BNC (fem.) |
Scope of delivery:
- MI19 IEPE Microphone
1/4″ measurement microphone
50mV/Pa
Class 1 – IEC 61672
Free field
20Hz to 20kHz
30dBA to 130dB
Price: 325 €
1/4″ measurement microphone
Infrasound to Ultrasound
Class 1 – IEC 61094-5
Free field
5 Hz to 30kHz
27dBA to 130dB
Price: 543 €
1/4″ measurement microphone
Splash proof
Class 1 – IEC 61094-5
Free field
20Hz to 20kHz
27dBA to 130dB
Price: 588 €
MP30 set + MK 301 E
40mV/Pa and 3.5mV/Pa
Class 1 – WS3F – IEC 61094-4
Free field
5Hz to 100kHz
18dBA to 168dB
Price: 1715 €
Model | Description | Price |
|---|---|---|
 | ROGA Instruments products are free from planned obsolescence, technically accessible, durable and repairable. | |
POM-MI1921 | MI19 and MI21 microphone sleeve adapter from 1/4″ inner diameter to 1/2″ outer diameter. POM material to ensure galvanic isolation to prevent ground and earth loops | 24 € |
POM-MI17RG50 | MI17 and RG-50 microphone sleeve adapter to 1/2″ outer diameter. POM material to ensure galvanic isolation to prevent ground and ground loops | 24 € |
MicCAL | Microphone Calibration Fee for ROGA Instruments microphones MI15 | MI17 | MI18 | MI19 | MI21| RG-50 | RG-50HL| MP30| MP40 After successful factory calibration, the microphone is returned to the customer with our factory calibration certificate. | 155 € |
MicREP | Microphone Repair Fee for ROGA Instruments microphones MI15 | MI17 | MI18 | MI19 | MI21| RG-50 After successful repair and factory calibration, the microphone is returned to the customer with our factory calibration certificate. | 225 € |
WS-RG-40 | 1/4″ microphone windscreen Ø 40 mm | 38 € |
MI19 | MI19; ¼” IEPE microphone for industrial applications Sensitivity 50 mV/Pa Constant current supply 2-8 mA BNC connector Polar pattern: omnidirectional Class 1 frequency response in accordance with IEC 61672 20 Hz – 20 kHz calibration sheet included Sensitivity & Frequency Response Inherent noise 30 dBA SPL Max 130 dB HS Code 85181000 | 325 € |
MI19SW | IP55 splash water resistant ¼” IEPE microphone for industrial applications Sensitivity 50 mV/Pa Constant current supply 2-8 mA BNC connector Polar pattern: omnidirectional Class 1 frequency response in accordance with IEC 61672 20 Hz – 20 kHz calibration sheet included Sensitivity & Frequency Response Inherent noise 30 dBA SPL Max 130 dB HS Code 85181000 | 455 € |
RG-50HL | High SPL Microphone e.g. shooting noise WS3F Free-field IEC 61094-5 Total length: 95 mm Sensitivity 14 mV/Pa constant current Supply 2-20 mA BNC connection Polar pattern: omnidirectional Frequency response: 5 Hz – 4 kHz: ± 1 dB 4 kHz – 30 kHz: ± 1.5 dB factory calibration certificate included measuring range up to SPL 144 dBRMS / 150 dB peak HS Code 85181000 | 1275 € |
MK342 E + MV310 Set | 1/4″ microphone with constant pressure frequency response WS3P according to IEC 61094-4 Pressure 3.5Hz to 70kHz 60dB(A) to 186dB pre-polarized HS Code 85181000 | 1480 € |
MI21 | MI21; ¼” IEPE condenser microphone Splash Water Proof IP55 Sensitivity 50 mV/Pa / ± 1.0 dB CCP IEPE supply 2-6 mA BNC connector Polar pattern: omnidirectional Frequency response IEC 61094-5 20 Hz – 4 kHz: ± 0.5 dB 4 kHz – 20 kHz: ± 1.5 dB corresponds to class 1 Calibration sheet included Sensitivity & Frequency Response Inherent noise 26 dB(A) SPL Max 130 dB HS Code 85181000 | 588 € |
MI17 | MI17; 1/4″ IEPE microphone, Sensitivity 50 mV/Pa, constant current supply 2-8 mA BNC connection Class 1 frequency response in accordance with IEC 61672 20 Hz – 20 kHz free field including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 30 dB (A) HS Code 85181000 | 425 €
|
MI17SW | MI 17SW; 1/4″ IEPE microphone Splash Water Proof IP55 Sensitivity 50 mV/Pa, constant current supply 2-8 mA BNC connection Frequency response: 20 Hz – 20 kHz: free field Class 1 frequency response in accordance with IEC 61672 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 30 dB (A) HS Code 85181000 | 495 €
|
RG-50 | RG-50; 1/4″ IEPE free field microphone Sensitivity 50 mV/Pa constant current supply 2- 20mA BNC connection Frequency response 5 Hz – 4 kHz: ± 0.5 dB 4 kHz – 30 kHz: ± 1.5 dB free field, corresponds to class 1 IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 26 dB (A) HS Code 85181000 | 543 € |
RG-50SW | RG-50SW; 1/4″ IEPE Free-field microphone Sensitivity 50 mV / Pa constant current supply 2- 20mA BNC connection Splash Water Proof IP55 Frequency response 5 Hz – 4 kHz: ± 0.5 dB 4 kHz – 30 kHz: ± 1.5 dB free field, corresponds to class 1 IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 26 dB (A) HS Code 85181000 | 588 € |