Accelerometer Price – IEPE Accelerometer – Vibration Sensor

Accelerometer – To complement our sound and vibration measurement technology, we offer accelerometers in a wide range of high-quality IEPE accelerometers for general, seismic and triaxial measurements.

The range of high quality accelerometers reaches from:

Vibration monitoring of machines is used for predictive maintenance. The products shown here are used to monitor vibration parameters.

If a limit value is exceeded, signaling or shutdowns can take place.Furthermore, you will find our balancing systems on this page.

Vibration Sensors

minature accelerometer
lightweight accelerometer
triaxial accelerometer
shock accelerometer
IEPE impedance head
airborne accelerometer
charge mode accelerometer
triaxial seat pad

KS901B Series

Low Cost IEPE Accelerometer

Features:

OEM sensor for hole mounting
Low-cost sensor for mass applications
Two sensitivity variants (10 and 100 mV/g)
Frequency response 0.35 Hz-28 kHz
Measuring range 50 g or 500 g
Mass 5.2 grams

YMC 141A Series

To use a triaxial accelerometer to measure vibration, you need to attach it to the surface of interest with a mounting fixture and connect it to a vibration analyzer or data logger.

You can then measure vibration levels in three axes – X, Y and Z – and analyze the data to identify patterns or irregularities.

Triaxial accelerometers are a useful tool for anyone involved in machine maintenance, structural inspection or vibration analysis, offering valuable insight into the health of the systems they monitor.

Features:

Small dimensions
Excellent phase response
High resolution
Low temperature coefficient
Well suited for modal and structural analysis
For sensitivity variants (10, 20, 50 and 100 mV/g)

Delivery with sensor cable 5 meter

1/4-28(4-Pin) to 3-BNC (5 Meter)

Seismic Accelerometer Set

RogaDAQ2 + KB12VD

KB12VD

High Sensitivity Accelerometer
Suitable for seismic measurements and structural investigations at low frequencies
Highly sensitive sensor system without internal amplification thus excellent resolution and lowest noise
Particularly good sensitivity/ mass ratio
Air-damped resonance and overload protection by friction coupling
IEPE voltage output
Frequency response 0.05 Hz – 260 Hz
Sensitivity 10 000 mV/g
Mass 150 grams
Measuring range ± 0.6 g

Accelerometer Price List

IEPE Low Cost

IEPE accelerometer
10 mV/g or 100 mV/g
Mass 5.2 grams
0.35 Hz to 28 kHz

Price: 199 $

Charge output

Low cost accelerometer
100 pC/g
Mass 20 grams
0.13 Hz to 6 kHz

Price: 247 $

Charge output

Precision accelerometer
25 pC/g
Mass 12 grams
0.13 Hz to 10 kHz

Price: 451 $

Subminiature

IEPE accelerometer
10 mV/g
Mass 1.3 grams
0.3 Hz to 37 kHz

Price: 645 $

Triaxial

Triax IEPE accelerometer
10 mV/g or 100 mV/g
Mass 6.2 grams
0.15 Hz to 22 kHz

Price: 1810 $

Model	Description	Price
KS901B10 KS901B100	Low-cost IEPE accelerometers for integration into machines and instruments Frequency response 0.35 Hz-28 kHz Sensitivity 10 mV/g or 100 mV/g Mass 5.2 grams Measuring range 500 g Download KS901B1x PDF	199 $
KS76C KS77C	General purpose shear-type accelerometer Two sensitivity versions Low sensitivity to temperature transients Low influence of base bending effects IEPE compatible output allows long cables High linear band width up to 37 kHz Low noise, high resolution Sturdy stainless steel housing M5 mounting thread in base	420 $
KS78C10 or KS78C100	KS78C10 \| 100; IEPE accelerometer Contains digital memory for sensor data (TEDS) Frequency response 0.65 Hz-23 kHz Sensitivity 10 mV/g or 100 mV/g Mass 11.2 grams Measuring range: 500 g or 50 g	290 $
KS84.100	Rugged stainless steel case With insulated case avoiding ground loop problems Double shielding for best EMI protection Protection grade IP67 by double sealing against humidity M12 connector for easy on-site installation, improved replacement for obsolete MIL-C-5015 connectors Economic price Successor model of KS80D	284 $
KS96B10 KS96B100	KS96B10 \| KS96B100 IEPE miniature accelerometer Frequency response 0.2 Hz-18 kHz Sensitivity 10 mV/g \| 100 mV/g Mass 3.2 g Measuring range ± 500 or ± 60 g	497 $
KS97B10 KS97B100	KS97B10 \| KS97B100 IEPE miniature accelerometer Frequency response 0.2 Hz-18 kHz Sensitivity 10 mV/g \| 100 mV/g Mass 3.2 g Measuring range ± 500 or ± 60 g	497 $
KS98B10 KS98B100	KS98B10 \| KS98B100 IEPE miniature accelerometer Frequency response 0.2 Hz-18 kHz Sensitivity 10 mV/g \| 100 mV/g Mass 3.2 g Measuring range ± 500 or ± 60 g	535 $
KS91C/01	Miniature Accelerometer For lightweight targets – KS91C in subminiature version – KS91C with IEPE voltage output – – High dynamic range – High resonant frequency – Low temperature dependence – Pluggable cables – KS91C with insulated bottom against ground loops Frequency response 0.3 Hz-37 kHz Sensitivity 10 mV/g Mass 1.3 grams Measuring range 600 g Transducer with accessory case: contents: cable 009-SUB-BNC-1.5, adhesive wax 002, instant adhesive 038, removal tool 039, identification sheet	645 $
KS48C/01	High Sensitivity Accelerometer @ 1000 mV/g Suited for seismic measurement and building vibration particularly at low frequencies Extremely sensitive piezo system provides excellent resolution and lowest noise KS48C with IEPE voltage output KS48C with protection grade IP67 Delivery version with accessories kit – 208: Rare earth magnetic base; M8; D30; 120 °C – 206: Screwed insulating flange; 2 x M8; D30; 110 °C – 043: Mounting stud; M8 x 10 – 085-B713G-BNC-5: Cable for IEPE sensors; 5 m; Binder 713; straight; female. to BNC; 80 °C; D5	903 $
KB12VD	High Sensitivity Accelerometer @ 10 V/g Suitable for seismic measurements and structural investigations at low frequencies – Highly sensitive sensor system without internal amplification – thus excellent resolution and lowest noise – KB12VD with particularly good sensitivity/ mass ratio – KB12VD with air-damped resonance and overload protection by friction coupling – KB12VD and KS48C with IEPE voltage output Frequency response 0.05 Hz – 260 Hz Sensitivity 10 000 mV/g Mass 150 grams Measuring range ± 0.6 g	864 $

Model	Picture	Triaxial Accelerometer	Price
KS903B10/01 or KS903B100/01		Small dimensions Excellent phase response High resolution Low temperature coefficient Includes electronic data sheet (TEDS) Suitable for modal and structural analysis Download KS903B1xx PDF	1810 $
KS813B Set		Inustrial Triaxial Accelerometer Set Rugged industrial design Protection grade IP67 Insulated base against ground loops Trough hole for easy attachment 088-B718G-B711-5: Cable with connector Binder 711, 5 m, for adapter 034 034-B711f-BNC: Adapter from connector Binder 711 to 3 BNC connectors	1503 $

Accelerometer sensors for industry, education, research, development and monitoring

Vibration Switch Introduction