Skip to content

PCB accelerometer - B&K accelerometer - ICP® - CCLD - IEPE
2nd hand sensors recalibrated

PCB 356B21

Triaxial Accelerometer ICP PCB
  • Price: 720 €

2nd HAND TRIAXIAL ACCELEROMETER

  • Triaxial ICP® accel.
  • 10 mV/g
  • 500 g
  • 2 to 7 kHz,
  • mini 4-pin conn.
  • 10 ft cable included

Features:

  • Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
  • Measurement Range: ±500 g pk (±4905 m/s² pk)
  • Electrical Connector: 8-36 4-Pin

Delivery with sensor cable 3 meter

  • 356B21 Triaxial accelerometer
  • Connection cable 1/4-28(4-Pin)/3-BNC (3 Meter)
  • Certificate of calibration

B&K Type 4508 B 002

Accelerometer
  • Price: 440 €

USES

  • Modal measurements for automotive body and
    power-train applications
  • Multichannel modal analysis measurements
  • Structural analysis measurements

FEATURES

  • Robust titanium housing with integrated titanium
    connector
  • Easily fitted to different test objects using a selection
    of mounting clips
  • Low-weight ThetaShear design giving high
    sensitivity/weight ratio and very low sensitivity to environmental factors
  •  Triaxial mounting facility
Sensitivity
100 mV/ms2
Measuring Range
70 ms2
Frequency Range, ± 10%
0.4 − 8k Hz
Case Material
Titanium
Connector
10 − 32 UNF coaxia
Dimensions (H×W×L)
10 × 10 × 10 mm (0.4″), excl. connector
Weight
4.8 gram (0.17 oz.)
Scope of delivery
4508 B 002 Sensor
Sensor cable:
009-UNF-BNC-1.5 to BNC 1.5 meter
Factory calibration certificate
case
Bump Test DAQ
Vibration Analyzer
NVH DAQ
IEPE Datalogger
  • CA-YD-188

Frequency range 0.2 – 3000 Hz

Temperature -54 – 121 ℃

Weight 101 grams

Sensitivity 500 mV/g

Residual noise level in specific frequency range (rms) ± 330 µg

Maximum operating level (peak) 70 g

Connection 10-32 UNF

  • Price : 265 €
  • TA-YD-159

Frequency range 0.1 – 500 Hz ±1 dB

Low-g Seismic Measurements

Very High Sensitivity at 10 V/g

IEPE Low Impedance Output

0.040 mg Resolution

Weight 300 grams

Isolation Mounted

Sensor Cable M5 – BNC 2 Meter

Accelerometer

ROGA-Instruments provides a broad range of IEPE accelerometers for General applications, Seismic measurements, High acceleration and shock, Light test objects, Triaxial measurements and Industrial applications.

 

The range of high quality accelerometers reaches from:

  • minature accelerometers 
  • lightweight accelerometers 
  • triaxial accelerometers 
  • shock accelerometers 
  • IEPE impedance head
  • airborne accelerometers 
  • charge mode accelerometers 

®TRADEMARK

ICP is a registered trademark of PCB Piezotronics, Inc., DeltaTron is a registered trademark of Hottinger Brüel & Kjær A/S, ISOTRON is a registered trademark of ENDEVCO. 

This document only describes the technical principles involved and inevitably mentions the registered trademarks of other manufacturers, which is not intended and will not harm the interests of trademark owners. The registered trademarks mentioned above belong to their respective owners.