This presentation explains the difference between measurement cards with and without anti-aliasing filters.
In this example, a 30 kHz signal is input.
The USB measurement card without an anti-aliasing filter incorrectly measures a 14 kHz signal at full energy.
Data acquisition without an anti-aliasing filter is unsuitable for dynamic sensor signals and leads to measurement errors.
Model | Description | Price |
|---|---|---|
Plug.n.DAQ Lite | 2-channel USB NVH DAQ Including IEPE sensor supply for any IEPE compatible sensors Measuring range: 0.1 Vot or 1 Volt or 5 Volt or 10 Volt Peak Frequency bandwidth: per channel: 0.3 Hz – 24 kHz HS Code 90318080 | 530 € |
RogaDAQ2 | 2-channel NVH USB DAQ 24 Bit resolution Switchable IEPE sensor supply. Switchable AC/DC coupling. Measuring range: 10 Volt Frequency bandwidth: per channel DC – 24 kHz With IEPE 0.3 Hz to 24 kHz HS Code 90318080 | 1250 € |
RogaDAQ4 | 4-channel USB DAQ 24-bit resolution switchable supply for IEPE sensors. Measuring range: + – 1 & 10 volts Frequency bandwidth: 4 channels: AC/DC 0 Hz – 80 kHz per channel HS Code 90318080 | 3840 € |
RogaDAQ16 | 16 channel USB IEPE measurement system IEPE (4mA, 28V sensor supply); 16x analog measuring channels ± 0.125 – ±10 V 400 kHz sampling rate (summ) 10 channels 0 Hz up to 20 kHz band width 4x16Bit analog outputs ± 10 V; 200 kHz sampling rate; 24 digital in- and outputs; 2×32-bit counter inputs; Cast aluminum housing; BNC connection sockets. Including DASYLab and LabVIEW driver HS Code 90318080 | 4990 € |
16-IEPE-USB | 16 channel sound and vibration DAQ This device combines simultaneous 24-bit digitization with real-time analysis capabilities via a USB interface. Software connectivity is provided via the widely adopted ASIO (Audio Stream Input/Output) standard. The ASIO protocol is vendor-independent, ensuring seamless integration with your software, regardless of the manufacturer. HS Code 90318080 | 3018 € |
16-XLR-NVH | 16 channel sound and vibration analysis system is supplied with the “NVH-FFT and NVH-IMP” software and represents the optimum measurement and analysis solution in noise and vibration measurement technology. HS Code 90318080 | 9818 € |
32-IEPE-USB | 32 channel sound and vibration DAQ This device combines simultaneous 24-bit digitization with real-time analysis capabilities via a USB interface. Software connectivity is provided via the widely adopted ASIO (Audio Stream Input/Output) standard. The ASIO protocol is vendor-independent, ensuring seamless integration with your software, regardless of the manufacturer. HS Code 90318080 | 6736 € |
32-XLR-NVH | 32 channel sound and vibration analysis system is supplied with the “NVH-FFT and NVH-IMP” software and represents the optimum measurement and analysis solution in noise and vibration measurement technology. HS Code 90318080 | 13536 € |
Model | Vibration Meter | Price |
|---|---|---|
VM25 | Machine condition monitoring to ISO 20816 Roller bearing monitoring to VDI 3832 etc. General vibration measurement in laboratory and industry Quality control Optical rotation speed measurement Non-contact temperature measurement HS Code 90318080 | 1820 € |
Model | High SPL Sound Level Meter for High Sound Pressure Level | Price |
|---|---|---|
308 | Class 1 sound level meter Measurement range: 20dBA ~ 134dBA Comply with IEC 61672-1:2013 ANSI S1.4-1983 and ANSI S1.43-1997 1/1 Octave in accordance with IEC 61260-1:2014 and ANSI S1.11-2004 Single range to cover 123dB dynamic range HS Code 90318080 | 2160 € |
308-HSPL-184 | Measuring range : 61 dBA~184 dB 308-HSPL Class 1 Sound Level Meter provides accurate and reliable sound level measurements, especially in high sound level environments Suitable for MIL-STD-1474 measurements HS Code 90318080 | 3960 € |
309-HSPL-171 | Measuring range : 49 dBA~171 dB 309-HSPL Class 2 Sound Level Meter provides accurate and reliable sound level measurements, especially in high sound level environments Suitable for MIL-STD-1474 measurements HS Code 90318080 | 2260 € |
DAQ Hardware Support
Plug.n.DAQ Lite, RogaDAQ2, RogaDAQ4, RogaDAQ16, LTTsmart, Apollo, 16-IEPE-USB, 16-IEPE-USB, USB Audio & ASIO Devices
Model | Description | Price |
|---|---|---|
NVH-FFT + NVH-IMP | Analysis software with FFT signal analysis, order analysis, acoustics, sound level, and sound power. Impulse hammer test module offers all functions for experimental modal analysis. | 7200 € |
NVH-IMP | Impulse hammer test module offers all functions for experimental modal analysis. | 5800 € |
Modal-ODS Add-On | Structural analysis and animation of the modal parameters eigenvector, natural frequency, and damping are determined offline. Transfer functions and geometry data can be imported in UFF format. | 6800 € |
NVH-MON Add-On | Machine Monitoring – Condition Monitoring | 6800 € |
Dual Plane Add-On | Dual Plane Balancing | 2400 € |
USB Dongle | License Protection Key For existing customers | 290 € |
Model | DASYLab Add-On Sound Level Meter + Sound Power Meter | Price |
|---|---|---|
Add-On SLM | SLM add-on upgrade fee to a newer DASYLab version (DASYLab serial number or SLM activation code required) . | 800 € |
Add-On SPM | The SPM module (Sound Power Measurement) determines the sound power from the output sound pressure levels of the SLM module, taking into account all necessary correction factors K0 to K4. (Add-on SLM base module required) | 800 € |
Update SLM | SLM add-on update fee to a newer DASYLab version (DASYLab serial number or SLM activation code required) | 400 € |
Update SLM | SPM Add-On update fee to a newer DASYLab version (DASYLab serial number or SLM activation code required) | 400 € |
Model | Impedance Tube SET 60 Hz – 6300 Hz | Price |
|---|---|---|
Sound Absorption Coefficient (α) and Transmission Loss (TL) Sound Absorption Standard: GB/T-18696, 2-2002, ISO10534-2, 1998; ASTM E1050-08 ASTM E2611-09 | ||
SW422 + SW477 Set | For accurate measurement of sound absorption coefficients (63-6300Hz) and transmission loss(60-6300Hz), includes:
– a 100mm diameter tube – a 100mm diameter sample holder – a 100mm diameter extension tube – a 30mm diameter tube – a 30mm diameter sample holder – a 30mm diameter extension tube Including PA50; Power Amplifier of 50W MC3242; DAQ card with 4 IEPE input channels and 2 signal output channels, USB power supply, 0-20kHz, connected with laptop. 4* MI19; 1/4″ microphone with IEPE Preamp, BNC CA114; 1000Hz, 94dB sound calibrator, Type 2, with adaptor for 1/2” and 1/4” microphones 30 mm and 100 mm sample cutter VA-Lab4 BASIC; Base software for measurement of noise and vibration, used for 4 channels VA-Lab4 IMP-A; Software for measurement of material impedance values (4 mics are needed), for measurement of Transfer Function and the calculation of sound impedance coefficients and sound impedance. HS Code 90318080 Including Mini-PC Including Sample Cutting Machine | 33800 € |
Model | Impedance tube prices without accessories | Price |
|---|---|---|
SW420 | For accurate measurement of sound absorption coefficient （63-1800Hz), 100mm inner diameter. Tube with 100mm diameter 100mm diameter sample holder HS Code 90318080 | 7150 € |
SW470 | For accurate measurement of sound absorption coefficient （1800 Hz- 6300 Hz) 30mm inner diameter. Tube with 30mm diameter 30mm diameter sample holder HS Code 90318080 | 6060 € |
SW422 | For accurate measurement of sound absorption coefficient （50-1800Hz) and material impedance values（63-1800Hz)100mm inner diameter. – 100mm diameter tube -Sample holder with 100mm diameter -100mm diameter extension tube HS Code 90318080 | 8130 € |
SW433 | For accurate measurement of sound absorption coefficients (125-3150Hz) and material impedance values (125-3150Hz) 60mm inner diameter, includes: – a 60mm diameter tube – a 60mm diameter sample holder – a 60mm diameter extension tube HS Code 90318080 | 8130 € |
SW477 | For accurate measurement of sound absorption coefficient （1600-6300 Hz) and material impedance values（1600-6300 Hz) 30mm inner diameter. – 30mm diameter tube – Sample holder with 30mm diameter – 30mm diameter extension tube HS Code 90318080 | 6920 € |
Model | Hemisphere Array for sound power measurement iso3744 | Price |
|---|---|---|
MF710 | Microphone holder for sound power measurement Radius 1m Meet the requirement of 10 microphone method according to GB 6882-1986, ISO 3745:1977, GB/T 18313-2001 and ISO 7779:2010. HS Code 90318080 | 7360 € |
MF710-2M | Microphone spherical surface mounting bracket, for the 10 test points on the spherical envelope required for sound power measurement of noise sources in accordance with ISO 3745:2003. Radius: 2.0 meters. Detachable. For 10-point method sound power testing. Microphones and cables not included. HS Code 90318080 | 8360 € |
MF720 | Microphone holder for sound power measurement Radius 1m meet the requirement of 20 microphone method according to GB/T 6882-2016、ISO 3745:2012. HS Code 90318080 | 8930 € |
Model | Hydrophone Measurement – Underwater Microphone | Price |
|---|---|---|
H3dX6 | The hydrophone H3 was designed as a leak detection tool. It offers exceptional sensitivity in a very small size that can be easily inserted into plumbing systems. In addition, the mechanically balanced dual-element design minimises acceleration noise. This helps to reduce handling noise and vibration-induced noise. HS Code 90318080 | 1065 € |
IEPE1 | IEPE-Powered Hydrophone Preamp HS Code 90318080 | 148 € |
Model | 1/2″ Microphone Capsules – Class 1 | Price |
|---|---|---|
MP30 Capsule | 1/2″ Free-field Sensitivity 40 mV / Pa Frequency response: 4 Hz – 20 kHz 4 kHz – 30 kHz: ± 1.5 dB IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 15 dB (A) HS Code 90318080 | 145 € |
MP40 Capsule | 1/2″ Free-field Sensitivity 50 mV / Pa Frequency response: 1.5 Hz – 20 kHz 4 kHz – 30 kHz: ± 1.5 dB IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 15 dB (A) HS Code 90318080 | 495 € |
MKS 222 E | Infrasound 1/2″ Free-field Sensitivity 50 mV / Pa Frequency response: 0.5 Hz – 20 kHz 4 kHz – 30 kHz: ± 1.5 dB IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 15 dB (A) HS Code 90318080 | 945 € |
MK 255 E | 1/2″ Free-field Sensitivity 50 mV / Pa Frequency response: 3.5 Hz – 20 kHz 4 kHz – 30 kHz: ± 1.5 dB IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 15 dB (A) HS Code 90318080 | 795 € |
MP231 | 1/2″ Free-field Sensitivity 40 mV / Pa Frequency response: 3 Hz – 20 kHz 4 kHz – 30 kHz: ± 1.5 dB IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 17 dB (A) HS Code 90318080 | 795 € |
Model | 1/4″ Microphone Capsules – Class 1 | Price |
|---|---|---|
MC14A Capsule | 1/4″ Free-field Sensitivity 4 mV / Pa Frequency response: 5 Hz – 75 kHz IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 35 dB (A) HS Code 90318080 | 485 € |
MC14B Capsule | 1/4″ Free-field Sensitivity 3 mV / Pa Frequency response: 5 Hz – 100 kHz IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 35 dB (A) HS Code 90318080 | 645 € |
MK 301 E Capsule | 1/4″ Free-field Sensitivity 3.5 mV / Pa Frequency response: 5 Hz – 100 kHz IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 35 dB (A) HS Code 90318080 | 895 € |
MK 341 E Capsule | 1/4″ Pressure-field Sensitivity 1.4 mV / Pa Frequency response: 5 Hz – 70 kHz IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 40 dB (A) HS Code 90318080 | 995 € |
MK 342 E Capsule | 1/4″ Pressure-field Sensitivity 0.25 mV / Pa Frequency response: 5 Hz – 70 kHz IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 60 dB (A) HS Code 90318080 | 1155 € |
Model | Microphone Holder | Price |
|---|---|---|
MH | Microphone Holder For 1/2-inch microphones Holder designed to attach to 1/4″-20 stud. Height from base to center of holder is 1″ HS Code 90318080 | 42 € |
MI-MH | Microphone Holder For microphones of the MIxx series | MI17 | MI19 | MI21 | RG-50 For 1/2″ and 12 mm diameter Swivel joint with knurled nut Color: Black Incl. 5/8″ thread 5/8″ to 3/8″ adapter included HS Code 90318080 | 57 € |
MH37 | MH37 microphone holder is suitable for all standard 1/4″ microphones For microphones from the MI15 | MI19 | MI21 | MV 310 | MM 310 series For 1/4″ and 7 mm diameter Swivel joint Color: black matt 3/8″ female thread 3/8″ to 1/4″ reduction thread included HS Code 90318080 | 72 € |
MH-MKPL | MH-MKPL microphone holder is suitable for all microphones in our range. 1/2″ microphone holder, 1/4″ female thread, PVC black Swivel head, 1/4″ thread Dimensions diameter: 25 x 73 mm External thread: 1/4″ Material: steel Type: black 1/4″ tripod internal thread 3/8″ to 1/4″ reduction thread included Weight: 54 grams HS Code 90318080 | 92 € |
MR-010 | Rain Protection Set Suitable for all microphones in 1/4″ or 1/2″ versions Waterproof cable entry allows the use of RG174 and RG58 coaxial cables with BNC connection The pole mounting is realized with two M6 nuts HS Code 90318080 | 180 € |
Model | Outdoor Measurement Microphone – Outdoor Microphone | Price |
|---|---|---|
MR10 | MR10 is a weatherproof microphone unit consisting of a 1/4″ IEPE measurement microphone MI19SW and the rain protection unit for outdoor use. HS Code 90318080 | 635 € |
MP30-R SET | Weatherproof 1/2″ IEPE Microphone The sound entrance at a 90º angle to the microphone axis is ideal for monitoring ambient and traffic noise. MP30-R is a 1/2-inch pre-polarized condenser outdoor microphone. It is suitable for continuous use in rainy days or in a very high or very low temperature environment. MP30-R uses a WS2F and IEC 61672 Class 1 MP30 microphone, which is characterized by its stability. It is the best choice for long-term outdoor use, such as noise monitoring. HS Code 90318080 | 1575 € |
iSV1611-R | Weatherproof 1/2″ USB Microphone The sound entrance at a 90º angle to the microphone axis is ideal for monitoring ambient and traffic noise. The iSV1611-R USB microphone is equipped with the MR40 microphone rain cover. Reference direction of sound incidence 90° to the microphone axis. HS Code 90318080 | 1575 € |
Model | 1/4″ IEPE Microphone Sytems Class 1 with Preamplifier | Price |
|---|---|---|
POM-MI1921 | MI19 and MI21 microphone sleeve adapter from 1/4″ inner diameter to 1/2″ outer diameter. POM material to ensure galvanic isolation to prevent ground and earth loops | 24 € |
POM-MI17RG50 | MI17 and RG-50 microphone sleeve adapter to 1/2″ outer diameter. POM material to ensure galvanic isolation to prevent ground and ground loops | 24 € |
MicCAL | Microphone Calibration Fee for ROGA Instruments microphones MI15 | MI17 | MI18 | MI19 | MI21| RG-50 | RG-50HL| MP30| MP40 After successful factory calibration, the microphone is returned to the customer with our factory calibration certificate. | 210 € |
MicREP | Microphone Repair Fee for ROGA Instruments microphones MI15 | MI17 | MI18 | MI19 | MI21| RG-50 After successful repair and factory calibration, the microphone is returned to the customer with our factory calibration certificate. | 225 € |
WS-RG-40 | 1/4″ microphone windscreen Ø 40 mm | 38 € |
MI15-HLSW-TNC | Robust Industrial Microphone – 160 dB High Sound Pressure Level – IP55 Overall Length: 65 mm Sensitivity: 1 mV/Pa Constant Current Supply: 2–20 mA TNC Connector Polarity: Omnidirectional Frequency Response: Class 1 IEC 61672-1 20 Hz – 30 kHz Factory Calibration Certificate Included with Sensitivity & Frequency Response Data Measurement Range: 46 dB(A) to SPL Max 160 dB HS Code 90318080 | 830 € |
MI19 | ¼” IEPE microphone for industrial applications Sensitivity 50 mV/Pa Constant current supply 2 – 20 mA BNC connector Polar pattern: omnidirectional Class 1 frequency response in accordance with IEC 61672 20 Hz – 30 kHz calibration sheet included Sensitivity & Frequency Response Inherent noise 30 dBA SPL Max 130 dB HS Code 90318080 | 490 € |
MI19SW | IP55 splash water resistant ¼” IEPE microphone for industrial applications Sensitivity 50 mV/Pa Constant current supply 2-8 mA BNC connector Polar pattern: omnidirectional Class 1 frequency response in accordance with IEC 61672 20 Hz – 30 kHz calibration sheet included Sensitivity & Frequency Response Inherent noise 30 dBA SPL Max 130 dB HS Code 90318080 | 535 € |
MI19-HS | High Sensitivity ¼” IEPE microphone for industrial applications Sensitivity 100 mV/Pa Constant current supply 2-8 mA BNC connector Polar pattern: omnidirectional Class 1 frequency response in accordance with IEC 61672 20 Hz – 30 kHz calibration sheet included Sensitivity & Frequency Response Inherent noise 22 dBA SPL Max 130 dBPeak HS Code 90318080 | 595 € |
MI19-HSSW | IP55 Splash Water Proof – High Sensitivity ¼” IEPE microphone for industrial applications Sensitivity 100 mV/Pa Constant current supply 2-8 mA BNC connector Polar pattern: omnidirectional Class 1 frequency response in accordance with IEC 61672 20 Hz – 30 kHz calibration sheet included Sensitivity & Frequency Response Inherent noise 22 dBA SPL Max 130 dBPeak HS Code 90318080 | 725 € |
MI19-HL | High Sound Pressure Level Microphone SPL Max. 179 dB(C) Peak ¼” IEPE microphone for industrial applications Sensitivity 0.35 mV/Pa Constant current supply 2-8 mA BNC connector Polar pattern: omnidirectional Class 1 frequency response in accordance with IEC 61672 20 Hz – 30 kHz calibration sheet included Sensitivity & Frequency Response Inherent noise 54 dBA SPL Max 179 dBCPeak HS Code 90318080 | 980 € |
MP30-HSPL-342 | High Sound Pressure Level Microphone SPL Max. 186 dB(C) Peak 1/4″ microphone with constant pressure frequency response WS3P according to IEC 61094-4 Pressure 3.5Hz to 70kHz 60dB(A) to 186dB pre-polarized HS Code 90318080 | 2105 € |
MP30-Ultra | Ultrasound Microphone 5 Hz to 100 kHz 1/4″ microphone with constant pressure frequency response WS3F according to IEC 61094-4 Free Field 5Hz to 100kHz 35dB(A) to 168dB pre-polarized HS Code 90318080 | 1995 € |
MI21 | ¼” IEPE condenser microphone Splash Water Proof IP55 Sensitivity 50 mV/Pa / ± 1.0 dB CCP IEPE supply 2-6 mA BNC connector Polar pattern: omnidirectional Frequency response IEC 61094-5 20 Hz – 4 kHz: ± 0.5 dB 4 kHz – 20 kHz: ± 1.5 dB corresponds to class 1 Calibration sheet included Sensitivity & Frequency Response Inherent noise 26 dB(A) SPL Max 130 dB HS Code 90318080 | 650 € |
MI17 | 1/4″ IEPE microphone, Sensitivity 50 mV/Pa, constant current supply 2-8 mA BNC connection Class 1 frequency response in accordance with IEC 61672 20 Hz – 30 kHz free field including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 30 dB (A) HS Code 90318080 | 625 €
|
MI17SW | 1/4″ IEPE microphone Splash Water Proof IP55 Sensitivity 50 mV/Pa, constant current supply 2-8 mA BNC connection Frequency response: 20 Hz – 30 kHz: free field Class 1 frequency response in accordance with IEC 61672 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 30 dB (A) HS Code 90318080 | 675 €
|
RG-50 | 1/4″ IEPE free field microphone Sensitivity 50 mV/Pa constant current supply 2- 20mA BNC connection Frequency response 5 Hz – 4 kHz: ± 0.5 dB 4 kHz – 30 kHz: ± 1.5 dB free field, corresponds to class 1 IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 26 dB (A) HS Code 90318080 | 670 € |
RG-50SW | 1/4″ IEPE Free-field microphone Sensitivity 50 mV / Pa constant current supply 2- 20mA BNC connection Splash Water Proof IP55 Frequency response 5 Hz – 4 kHz: ± 0.5 dB 4 kHz – 30 kHz: ± 1.5 dB free field, corresponds to class 1 IEC 61094-5 including individual Calibration sheet (sensitivity & frequency response) Inherent Noise 26 dB (A) HS Code 90318080 | 700 € |
RG-50HL | High Sound Pressure Level Microphone SPL Max. 150 dB(C) Peak High SPL Microphone e.g. shooting noise WS3F Free-field IEC 61094-5 Total length: 95 mm Sensitivity 14 mV/Pa constant current Supply 2-20 mA BNC connection Polar pattern: omnidirectional Frequency response: 5 Hz – 4 kHz: ± 1 dB 4 kHz – 30 kHz: ± 1.5 dB factory calibration certificate included measuring range up to SPL 144 dBRMS / 150 dB peak HS Code 90318080 | 880 € |
RG-50HLSW | High Sound Pressure Level Microphone SPL Max. 150 dB(C) Peak Splash Water Proof IP55 High SPL Microphone e.g. shooting noise WS3F Free-field IEC 61094-5 Total length: 95 mm Sensitivity 14 mV/Pa constant current Supply 2-20 mA BNC connection Polar pattern: omnidirectional Frequency response: 5 Hz – 4 kHz: ± 1 dB 4 kHz – 30 kHz: ± 1.5 dB factory calibration certificate included measuring range up to SPL 144 dBRMS / 150 dB peak HS Code 90318080 | 930 € |
MM310 | Ultra Sound Microphone SPL Max. 158 dB Peak High SPL Microphone e.g. shooting noise WS3F Free-field IEC 61094-5 Total length: 58 mm Sensitivity 3.5 mV/Pa constant current Supply 2-20 mA BNC connection Polar pattern: omnidirectional Frequency response: 20 Hz – 100 kHz: factory calibration certificate included HS Code 90318080 | 1360 € |
Model | 1/2″ IEPE Microphone Sytems Class 1 WS2F & WS2D | Price |
|---|---|---|
MicCAL | Microphone Calibration Fee for all ROGA Instruments microphones. After successful factory calibration, the microphone is returned to the customer with our factory calibration certificate. | 210 € |
WS-RG-80 | 1/2″ measurement microphone wind screen Ø 80 mm diameter | 38 € |
MP30 | MP30 Microphone Set Prepolarised Microphone Capsule with Microphone Preamplifier 1/2″ IEPE Free-field microphone Sensitivity 40 mV/Pa constant current supply 2- 20mA BNC connection Polar pattern: omnidirectional Frequency response 4 Hz ~ 10 Hz ± 1.5 dB 10 Hz – 4 kHz: ± 0.5 dB 4 kHz – 20 kHz: ± 2.5 dB free field, corresponds to class 1 including individual Calibration sheet (sensitivity & frequency response) Measuring Range: 16 dB(A) to 135 dB HS Code 90318080 | 1170 € |
MP30-50 | MP30 Microphone Set Prepolarised Microphone Capsule with Microphone Preamplifier 1/2″ IEPE Free-field microphone Sensitivity 50 mV/Pa constant current supply 2- 20mA BNC connection Polar pattern: omnidirectional Frequency response 4 Hz ~ 10 Hz ± 1.5 dB 10 Hz – 4 kHz: ± 0.5 dB 4 kHz – 20 kHz: ± 2.5 dB free field, corresponds to class 1 including individual Calibration sheet (sensitivity & frequency response) Measuring Range: 16 dB(A) to 135 dB HS Code 90318080 | 1210 € |
MP30-231 | MP30-231 Microphone Set Prepolarised Microphone Capsule with Microphone Preamplifier 1/2″ IEPE difussefield microphone Sensitivity 50 mV/Pa constant current supply 2- 20mA BNC connection Polar pattern: omnidirectional Frequency response 3.5 Hz – 16 kHz: ± 2 dB including individual Calibration sheet (sensitivity & frequency response) Measuring Range: 15 dB(A) to 135 dB HS Code 90318080 | 1530 € |
MP30-Infra | 1/2″ microphone for infrasonic low frequency applications WS2F according to IEC 61094-4 Free field 0.5 Hz to 20 kHz 15 dBA to 135 dB pre-polarized 1/2″ microphone preamplifier MP30 included HS Code 90318080 | 1720 € |
MP40
| MP40 Set 1/2 ” condenser microphone WS2F (DIN IEC 61094-4) Frequency range: 1.5 Hz – 3.5 Hz: ± 1.5 dB 3.5 Hz – 4 kHz: ± 0.5 dB 4 kHz – 20 kHz: ± 1.5 dB Free-field Including preamplifier PA-01 Dynamic range 16 dB(A) -135dB IEPE Constant Current powered Sensitivity: 50 mV / Pa Download MP-40 PDF 90318080 | 1236 € |
MM210 | 1/2″ microphone for general applications WS2F according to IEC 61094-4 Free field 50 mV/Pa 3.5 Hz to 20 kHz 15 dBA to 146 dB pre-polarized 1/2″ microphone preamplifier MV210 included HS Code 90318080 | 1480 € |
MMS 214 | Low noise microphone MMS 214 has a particularly low inherent noise level and is designed for acoustic measurements of low sound pressure levels close to the threshold of human hearing HS Code 90318080 | 2950 € |
Model | USB Measurement Microphone – Class 1 Sytems | Price |
|---|---|---|
iSV1611 | 1/2″ USB microphone WS2F according to IEC 61094-4 Free Field 4 Hz to 20 kHz 16 dBA to 140 dB | 925 € |
iSV1611-R | 1/2″Weatherproof USB Microphone WS2F according to IEC 61094-4 Free Field 4 Hz to 20 kHz 16 dBA to 140 dB | 1575 € |
iSV1611-167 | 1/4″ USB microphone WS3P according to IEC 61094-4 Pressure field 3.5 Hz to 70 kHz 57 dBA to 167 dBA | 1765 € |
iSV1611-Infra | 1/2″ USB microphone WS2F according to IEC 61094-4 Free Field 1 Hz to 20 kHz 15 dBA to 140 dB | 1775 € |
iSV1611-Ultra | 1/4″ USB microphone WS3F according to IEC 61094-4 Free field 5 Hz to 75 kHz 35 dBA to 158 dB | 1765 € |
iSV1611-342 | 1/4″ High SPL USB microphone 1/4″ microphone WS3P acc to IEC 61094-4 Pressure 3.5Hz to 80 kHz 60dBA to 186dB | 2085 € |
Model: | PCB 086E80 | IH-01-1 | IH-01 | IH-02 | IH-05 | IH-10 | IH-20 | IH-50 |
|---|---|---|---|---|---|---|---|---|
Sensitivity mV/N | 22.5 | 100 | 25 | 2.5 | 1 | 0.5 | 0.25 | 0.1 |
Measuring Range N | 220 | 50 | 200 | 2000 | 5000 | 10000 | 20000 | 50000 |
Nonlinearity % | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 |
Resolution mN rms | 2 | 2 | 6 | 50 | 100 | 250 | 450 | 1000 |
Resonant Frequency kHz | 100 | 70 | 60 | 55 | 55 | 45 | 45 | 45 |
Low Frequency Hz | 1 | 1 | 1 | 1 | 0.5 | 0.5 | 0.5 | 0.5 |
Head Weight g | 4.8 | 15 | 28 | 80 | 120 | 445 | 445 | 1000 |
Head Diameter mm | Φ6.8 | Φ14 | Φ18 | Φ16 | Φ20 | Φ32 | Φ32 | Φ51 |
Hammer Length mm | 175 | 125 | 250 | 250 | 250 | 340 | 340 | 400 |
Output Connector | µDOT | µDOT | BNC | BNC | BNC | BNC | BNC | BNC |
Price | 1877 € | 977 € | 999 € | 1085 € | 1230 € | 1230 € | 1270 € | 1320 € |
Model | Vibration Calibrators | Price |
|---|---|---|
VC-01
| The VC-01 vibration calibrator is a small and light hand-held calibrator for quick checking of acceleration and vibration sensors. | 1970 €
|
VC-01A
| VC-01A vibration calibrator is a small and light hand-held calibrator for quick checking of acceleration and vibration sensors. Operating frequency (±0.5%): 80Hz, 159.2Hz, 1kHz Acceleration output (m/s2 rms): 0.98, 4.91, 9.81 | 3110 €
|
VC-02
| Vibration calibrator system for all vibration sensors With a wide vibration frequency range of 10 Hz to 10 kHz and an adjustable vibration amplitude of 0 to ±5g RMS, the VC-02 is suitable for most vibration measurement applications. | 8590 €
|
VC-02A
| Vibration calibrator system for all vibration sensors Internal power supply with built-in rechargeable battery With a wide vibration frequency range of 10 Hz to 10 kHz and an adjustable vibration amplitude of 0 to ±5g RMS, the VC-02 is suitable for most vibration measurement applications. | 9670 €
|
Model | Microphone Calibrator – Sound Calibrator | Price |
|---|---|---|
CA114
| Sound pressure calibrator Conforms to IEC 60942 Class 2 for 1/2 ” & 1/4″ microphone capsules with quartz-controlled oscillator to verify accuracy on IEC 60942 Class 2 sound level meters 94 dB @ 1000 Hz output level | 380 € |
CA111 | Sound calibrator; Conforms to IEC 60942 Class 1 for 1/2 “& 1/4” microphone capsules with quartz-controlled oscillator to verify accuracy on IEC 60942 Class 1 sound level meters. 94 dB and 114 dB @ 1000 Hz output level selectable | 880 € |
4010 | Calibrator 94 dB/114 dB, 250 Hz/1k Hz Direct connection for 1″ and with adapter 1/2″ and 1/4″ In leather case Class 1 | 1390 € |
CA916 | Full frequency coupler for 1/2″ and 1/4″ microphones, the measuring frequency range extends from 20 Hz~20 kHz. | 6825 € |
CA916-Set | Measuring microphone calibration system Full frequency coupler for 1/2″ and 1/4″ microphones Measuring frequency range from 20 Hz~20 kHz Scope of delivery: CA916 full frequency coupler ZOOM UAC-232 2 channel USB audio interface MP48 2 pieces IEPE – XLR adapter Mini-PC ASUS PN41 / 16 GB / 1000 GB / Win 11 Pro BSWA VA Audio Software pre-installed | 9145 € |
CA935 | Developed according to the Oberst tube principle with variable cross-section Calibration dynamic range from 94 dB to 180 dB Built-in loudspeaker with high sensitivity and low distortion Total harmonic distortion ≤0.5 % (@ 171 dB / 500 Hz), ≤2.5 % (@ 180 dB / 500 Hz) | 17900 € |
Model | IEPE Power Supply – IEPE Sensor Conditioner- IEPE Amplifier | Price |
|---|---|---|
MP48
| XLR 48 Volt to IEPE Sensor BNC Adapter XLR Male to BNC Female Operates with 48V phantom power via the XLR connector Provides ICP constant current at the BNC connector No separate power supply required | 148 €
|
PS-24-DIN
| For DIN Rail Mount The PS-24-DIN provides 4 mA/24V supplies for sensors with integrated amplifiers like IEPE measurement microphones , accelerometers, force and pressure transducers. The PS-24-DIN are mountable for standard industrial applications. | 99 €
|
8201T
| 1 Channel IEPE Sensor Supply | 316 €
|
8201
| Portable IEPE Sensor Amplifier Two selectable gains 0dB and + 20dB are available. The integrated rechargeable 9 volt battery is designed for a long operating time of more than 4 hours. | 426 €
|
MC102A
| 2 Channel IEPE Power Supply Provides power for microphones, accelerometers and other ICCP transducers | 482 €
|
AV14S
| IEPE Amplifier with BNC & Headphone Output IEPE amplifier AV14S is a small battery driven instrument, which has been constructed mainly to monitor acoustic or vibration signals. | 940 €
|
Model | Electronic stethoscope | Price |
|---|---|---|
ES12-SET
| 1-channel monitor amplifier and charge amplifier AV14 AC adapter, 100-240 VAC / 12 VDC 1/4″ directional microphone MI 10 Accelerometer 222A100 B001-100N Holding magnet insulating type – 100 Newton holding force sensor cable 1.5 meter headphones KH 10 | 3510 €
|
AV14-SET
| 1-channel monitor amplifier and charge amplifier AV14 AC adapter, 100-240 VAC / 12 VDC B001-100N Holding magnet insulating type – 100 Newton holding force Accelerometer 222A100 sensor cable 1.5 meter | 1620 €
|
Model | Directional Microphone Description | Price |
|---|---|---|
AV11 Set | Frequency selective directional microphone for airborne sound. Specially designed for one-hand operation. ⅓- and 1-octave bandwidth, 4-pole. AV11 amplifier, Microphone MI10 fixed to AV11 housing. Gain +20 dB Incl. Headphones, charger and case. Weight: approx. 4 kg | 4530 € |
AV11 | Frequency selective directional microphone for airborne sound. Specially designed for one-hand operation. ⅓- and 1-octave bandwidth, 4-pole. AV11 amplifier, Microphone MI10 fixed to AV11 housing. Gain +20 dB Incl. Charger | 3820 € |
Model | Insulating Magnetic Mount Base | Price |
|---|---|---|
B001-50N
| 50 Newton holding force M5 threaded socket Mass: 7 grams Diameter: 13 mm height: 8 mm | 62 €
|
B001-100N
| 100 Newton holding force M5 threaded socket Mass: 19 grams Diameter: 19 mm height: 10 mm | 75 €
|
B002-150N
| For flat and curved surfaces M5 internal thread 150 Newton adhesive force Mass: 47 grams Φ26×26 – M5 For sensor mass <100 grams | 135 €
|
Model | Picture | Description | Price |
|---|---|---|---|
U122E |  | IEPE Accelerometer Frequency response 0.5 Hz-11 kHz Sensitivity 10 mV/g Mass 5.2 grams Measuring range 500 g | 290 € |
U122E.6 | | IEPE Accelerometer Frequency response 0.5 Hz-10 kHz Sensitivity 100 mV/g Mass 5.2 grams Measuring range 50 g | 290 € |
122A01 |  | Shock Accelerometer IEPE Frequency response 1 Hz-10 kHz Sensitivity 1 mV/g Mass 8.8 grams Measuring range 5000 g | 445 € |
KS901B10 KS901B100 |  | IEPE accelerometer for integration into machines and instruments Frequency response 0.35 Hz-28 kHz Sensitivity 10 mV/g or 100 mV/g Mass 5.2 grams Measuring range 500 g Download KS901B1x PDF | 215 € |
KS76C KS77C |  | General purpose shear-type accelerometer Two sensitivity versions Low sensitivity to temperature transients Low influence of base bending effects IEPE compatible output allows long cables High linear band width up to 37 kHz Low noise, high resolution Sturdy stainless steel housing M5 mounting thread in base | 425 € |
KS78C10 |  | KS78C10 IEPE accelerometer Contains digital memory for sensor data (TEDS) Frequency response 0.65 Hz-23 kHz Sensitivity 10 mV/g Mass 11.2 grams Measuring range: 500 g | 295 € |
KS84B10
|  | 10 mV/g Industrial Accelerometer Includes electronic data sheet (TEDS; IEEE 1451.4; Template 25 w. DS2431) Rugged stainless steel case With insulated case avoiding ground loop problems Double shielding for best EMI protection Protection grade IP67 by double sealing against humidity M12 connector for easy on-site installation, improved replacement for obsolete MIL-C-5015 connectors Economic price | 332 € |
KS84.100
| | 100 mV/g Industrial Accelerometer Rugged stainless steel case With insulated case avoiding ground loop problems Double shielding for best EMI protection Protection grade IP67 by double sealing against humidity M12 connector for easy on-site installation, improved replacement for obsolete MIL-C-5015 connectors Economic price | 332 € |
KS84B500
| | 500 mV/g Industrial Accelerometer Includes electronic data sheet (TEDS; IEEE 1451.4; Template 25 w. DS2431) Rugged stainless steel case With insulated case avoiding ground loop problems Double shielding for best EMI protection Protection grade IP67 by double sealing against humidity M12 connector for easy on-site installation, improved replacement for obsolete MIL-C-5015 connectors Economic price | 332 € |
KS96B10 KS96B100 |  | KS96B10 | KS96B100 IEPE miniature accelerometer Frequency response 0.2 Hz-18 kHz Sensitivity 10 mV/g | 100 mV/g Mass 3.2 g Measuring range ± 500 or ± 60 g | 515 €
|
KS97B10 KS97B100 |  | KS97B10 | KS97B100 IEPE miniature accelerometer Frequency response 0.2 Hz-18 kHz Sensitivity 10 mV/g | 100 mV/g Mass 3.2 g Measuring range ± 500 or ± 60 g | 515 € |
KS98B10 KS98B100 |  | KS98B10 | KS98B100 IEPE miniature accelerometer Frequency response 0.2 Hz-18 kHz Sensitivity 10 mV/g | 100 mV/g Mass 3.2 g Measuring range ± 500 or ± 60 g | 553 € |
KS91C/01
|  | Miniature Accelerometer For lightweight targets – KS91C in subminiature version – KS91C with IEPE voltage output – – High dynamic range – High resonant frequency – Low temperature dependence – Pluggable cables – KS91C with insulated bottom against ground loops Frequency response 0.3 Hz-37 kHz Sensitivity 10 mV/g Mass 1.3 grams Measuring range 600 g Transducer with accessory case: contents: cable 009-SUB-BNC-1.5, adhesive wax 002, instant adhesive 038, removal tool 039, identification sheet | 650 € |
KS48C-SET
|  | High Sensitivity Accelerometer @ 1000 mV/g Suited for seismic measurement and building vibration particularly at low frequencies Extremely sensitive piezo system provides excellent resolution and lowest noise KS48C with IEPE voltage output KS48C with protection grade IP67 Delivery version with cable and magnetic base – 208: Rare earth magnetic base; M8; D30; 120 °C 085-B713G-BNC-5: Cable for IEPE sensors; 5 m; Binder 713; straight; female. to BNC; 80 °C; D5 | 915 € |
KB12VD
|  | High Sensitivity Accelerometer @ 10 V/g Suitable for seismic measurements and structural investigations at low frequencies – Highly sensitive sensor system without internal amplification – thus excellent resolution and lowest noise – KB12VD with particularly good sensitivity/ mass ratio – KB12VD with air-damped resonance and overload protection by friction coupling – KB12VD and KS48C with IEPE voltage output Frequency response 0.05 Hz – 260 Hz Sensitivity 10 000 mV/g Mass 150 grams Measuring range ± 0.6 g | 890 € |
Model | Picture | Triaxial Accelerometer | Price |
|---|---|---|---|
141A10 |  | 10 mV/g Small dimensions Excellent phase response High resolution Low temperature coefficient Suitable for modal and structural analysis Including connection cable 1/4-28(4-Pin)/3-BNC (5 Meter) | 1620 €
|
141A100 | | 100 mV/g Small dimensions Excellent phase response High resolution Low temperature coefficient Suitable for modal and structural analysis Including connection cable 1/4-28(4-Pin)/3-BNC (5 Meter) | 1620 €
|
KS903B10/01
|  | 10 mV/g Small dimensions Excellent phase response High resolution Low temperature coefficient Includes electronic data sheet (TEDS) Suitable for modal and structural analysis Download KS903B1xx PDF | 1820 €
|
KS903B100/01
| | 100 mV/g Small dimensions Excellent phase response High resolution Low temperature coefficient Includes electronic data sheet (TEDS) Suitable for modal and structural analysis Download KS903B1xx PDF | 1820 €
|
KS813B/01 Set |  | Inustrial Triaxial Accelerometer Set Rugged industrial design Protection grade IP67 Insulated base against ground loops Trough hole for easy attachment 088-B718G-B711-5: Cable with connector Binder 711, 5 m, for adapter 034 034-B711f-BNC: Adapter from connector Binder 711 to 3 BNC connectors | 1550 €
|
Model | KS48C & KS84 Series M12 – BNC RG58 – Coaxial Cable | Price |
|---|---|---|
085-B713W-BNC-0.3 | M12 (IEPE) angled/BNC; 30 cm | HS Code: 90318080 | 62 € |
085-B713W-BNC-5 | M12 (IEPE) angled/BNC; 5 m | HS Code: 90318080 | 78 € |
085-B713W-BNC-10 | M12 (IEPE) angled/BNC; 10 m | HS Code: 90318080 | 92 € |
085-B713W-BNC-30 | M12 (IEPE) angled/BNC; 30 m | HS Code: 90318080 | 138 € |
Model | BNC – BNC Coaxial Cable | Price |
|---|---|---|
RogaBNC2-S | 2 meter, BNC-BNC cable with kink protection SYV-50-2-41 coaxial 50Ω, 295 Ω/km, shielded, black Temperature range: -40 to +80°C, 4 Ømm | 49 € |
RogaBNC2 | 2 meter, BNC-BNC cable with kink protection RG174A/U coaxial 50Ω, 295 Ω/km, shielded, black Temperature range: -20 to +70°C, 2.8 Ømm Also available with TNC connectors | 55 € |
RogaBNC3 | 3 meter, BNC-BNC cable with kink protection RG174A/U coaxial 50Ω, 295 Ω/km, shielded, black Temperature range: -20 to +70°C, 2.8 Ømm Also available with TNC connectors | 63 € |
RogaBNC5 | 5 meter, BNC-BNC cable with kink protection RG174A/U coaxial 50Ω, 295 Ω/km, shielded, black Temperature range: -20 to +70°C, 2.8 Ømm Also available with TNC connectors | 65 € |
RogaBNC10 | 10 meter, BNC-BNC cable with kink protection RG174A/U coaxial 50Ω, 295 Ω/km, shielded, black Temperature range: -20 to +70°C, 2.8 Ømm Also available with TNC connectors | 75 € |
RogaBNC15 | 15 meter, BNC-BNC cable with kink protection RG174A/U coaxial 50Ω, 295 Ω/km, shielded, black Temperature range: -20 to +70°C, 2.8 Ømm Also available with TNC connectors | 95 € |
RogaBNC20 | 20 meter, BNC-BNC cable with kink protection RG174A/U coaxial 50Ω, 295 Ω/km, shielded, black Temperature range: -20 to +70°C, 2.8 Ømm Also available with TNC connectors | 133 € |
Model | µDot – 10-32 to BNC Coaxial Cable | Price |
|---|---|---|
Roga-UNF-BNC-2 | Accelerometer Sensor Cable , 50Ω; UNF/BNC; 2 meter Temperature range: -40 to +80°C, 2 Ømm | 48 € |
009-UNF-BNC-1,5 | Accelerometer Sensor Cable low noise; UNF/BNC; 1.5 m; 120 °C | 58 € |
010-UNF-BNC-3 | Accelerometer Sensor Cable low noise; UNF/BNC; 3 meter; 120 °C | 98 € |
010-UNF-BNC-5 | Accelerometer Sensor Cable low noise; UNF/BNC; 5 meter; 120 °C | 112 € |
010-UNF-BNC-10 | Accelerometer Sensor Cable low noise; UNF/BNC; 10 meter; 120 °C | 150 € |
Model | µDot – 10-32 to 10-32 Coaxial Cable | Price |
|---|---|---|
009-UNF-UNF-1.5 | Accelerometer Sensor Cable low noise; UNF/UNF; 1.5 meter; 120 °C | 65 € |
009-UNF-UNF-3 | Accelerometer Sensor Cable low noise; UNF/UNF; 3 meter; 120 °C | 104 € |
009-UNF-UNF-5 | Accelerometer Sensor Cable low noise; UNF/UNF; 5 meter; 120 °C | 119 € |
009-UNF-UNF-10 | Accelerometer Sensor Cable low noise; UNF/UNF; 10 meter; 120 °C | 156 € |
Previous pricing and price lists are no longer valid.
Prices and conditions are subject to change without notice.
All prices are without current VAT.
Terms of payment in advance.
Our group only accept 100% T/T before shipping.
ROGA Instruments only offers its products for direct sale to end customers.