Skip to content

Ultrasound Microphone Set - 10 Hz to 95 kHz - Class1 Industrial Grade

Ultrasonic microphone set

Frequency response 10 Hz to 95 kHz

ZOOM UAC-232 IEPE interface realized with the MP48 IEPE-XLR adapters.
It offers outstanding technical features in terms of the linearity of the frequency response from 10 Hz to 95 kHz and a signal-to-noise ratio with 32-bit float technology. You no longer have to worry about optimum leveling.
It is particularly suitable for measurement microphone applications such as ultrasonic measurements or measurements of very quiet noises in a measurement chamber.

ZOOM MP30-Ultra Set

Ultrasound Microphone
  • Dual AD circuitry with 32-bit float recording technology
  • High-quality mic preamps, same as the Zoom F6
  • 2x XLR/TRS combo inputs
  • Headphone output and 2x TRS main outputs
  • High-power headphone outputs (100 mW)
  • Records up to 192 kHz sample rate
  • Compatible with Windows, Mac, and iOS devices (Android not supported)
  • Vertical or horizontal use
  • Bus-powered operation (separate power required for Lightenting-enabled iOS devices)
MP30-Ultra
 
  • Class 1 WS3F according to IEC 61094-4
  • Microphone type: Free field
  • Pre-polarized
  • Microphone size: 1/4″
  • Frequency response: 5 Hz to 100 kHz
  • Polar pattern: omnidirectional
  • Sensitivity 3.5 mV/Pa
  • Measuring range 36 dB (A) to 168 dB SPL peak (5% dist.)
  • IEPE supply 2 – 20 mA
  • Bias voltage: 12.5 V
  • Temperature range -10 to +100 °C
  • Dimensions: ø12.5 x 150 mm
  • Connector: BNC
  • WS-RG-40 windscreen 40 mm diameter

Ultrasonic microphone with software and USB measurement data acquisition

10 Hz to 30 kHz

Ultrasound Microphone Set

RG-50 - MP48 - ZOOM UAC-232

Here you will find our Ultrasonic Microphone Kit. It consists of the RG-50 1/4’ measurement microphone with linear frequency response up to 30 kHz, the MP48 IEPE sensor XLR 48 V phantom power adapter and the powerful ZOOM UAC-232 USB audio converter.

Since December, the globally recognised FFT analyser and measurement microphone software ARTA has been released by the manufacturer as freeware. We would like to thank the manufacturer for this generous support.

With calibrated microphone, ARTA can be used as a virtual IEC class 1 SPL meter with a real time modes:

Integrating SPL meter with 24 hours data logging,
Octave SPL meter with noise rating (NR, NC, PNC, RC,NCB),
Third octave SPL meter with report of loudness in sones and level in phones

Low-Noise Microphone Set

MMS214 + ZOOM UAC-232

Low Noise Microphone

Ultrasonic Microphone Set

RG-50 – MP48 – ZOOM UAC-232

Ultrasound Microphone Set
Measurement Microphone Set
 
MI19 + Plug.n.DAQ Lite
Sound Measurement
Measurement Microphone Software Freeware

I would like to take this opportunity to provide a brief introduction to the ARTA software, which includes Plug.n.DAQ Lite MMS 214 Low Noise Microphone and Microphone Calibrator. 

In this demonstration, I will be showing the calibration of the measurement chain.