Skip to content

3 channel iepe

AVC3000

sensor interface

Portable 3 channel
iepe sensor amplifier

AVC3000 | PA-3000

The AVC3000 is an portable 3 channel IEPE sensor interface. It has 4mA/24V supplies for sensors with integrated amplifiers. For low level signal amplification it features three selectable gain ranges and individually selectable highpass- and lowpassfilters for all three channels. Indicators for sensor condition and signal overload further minimize the risk of handling errors. The integrated rechargeable battery ensures a long operating time and the unit may be charged and operated at the same time.

avc3000

The AVC3000 has a durable aluminum housing and a membrane keypad withstanding dust and moisture.

The low noise, wide dynamic range and excellent accuracy make the AVC3000 an excellent choice for demanding measurement applications.

ICP® is a registered trademark of PCB Group, inc., Depew, New York

BUDGET
2-channel IEPE USB audio interface
with headphone connection for listening to the sensor signal


Measurement microphone and accelerometer not included

The MP48 set consisting of two IEPE-XLR adapters in connection with a 2-channel USB audio interface offers you a cost-effective entry into professional sound and vibration measurement technology.

  • 2×2 USB 2.0 audio interfaces
  • Resolution: 192KHz/24Bit
  • Two front combo inputs Mic/Line/Inst:
    XLR/jack
  • 2x microphone preamps with 48V phantom power
  • Outputs: 2x 6.3mm TRS jack
  • Direct Monitoring: switchable between mono and stereo mode
  • Front panel master volume control
  • Stereo headphone output with volume control
  • Phone I/O: 3.5mm TRRS jack
  • USB bus powered
  • Supports Windows 10 and Windows 11 with ASIO 2.0
  • MME, WDM and DirectSound support
  • Supports Mac via native CoreAudio USB audio drivers
  • No driver installation necessary
Translate »